NOTICE: This is a customer-to-customer discussion forum. DO NOT post messages here when requiring manufacturer support, instead please submit a question using our Knowledge Base.
I'm running High inputs for everything except for aux. I'm running a CarPC on the Aux IN which I can't set the gains on. When the car is off and I'm using Aux, I can barely hear the music there is so much noise. When I'm not in aux, I can hear it bleed but it's not as loud.. maybe 1/4th. The car is not running during this. If I disconnect the RCA's from the 3sixty the noise goes away completely. I have everything grounded to the same spot (computer, 3sixty, amps).
Any ideas? If I run high level inputs for Front, Rear and Sub, can I still run a low level aux input? That's the only thing I can think might be causing this.
either that or a real ****ty output on the car pc. um maybe a line driver will help boost the signal. or ground loop isolator. um how high is the inupt knob on the aux in portion of the 360?
Well, I don't have the remote knob hooked up. I'm going to hook it up tonight. I'm hoping that the default is 100% volume when the knob is unhooked so that I can turn it down.
I think there are two problems however. Gain level and ground noise. I'll post back tonight on how it goes with the remote knob.
Can't seem to find the remote control. Does anyone know if the aux input is automatically leveled when doing a new install with pink noise / sweeps? I'll run the CD through my computer if it does.
I don't think the CarPC will work going into the AUX in on the 3Sixty. I bet you are getting a ton of noise because your carpc is wired into the cars electrical system...
Call RF Tech@ 800-669-9899 and they should be able to provide some assistance.
Discussion Forum
Problems with Aux Input whine (car off)
Posted - 07/18/2010 : 12:47:28 PM
